Chapter 10 JF type sequin embroidery
④
Use
or
till you see “B” in “input sequin mode”, then press “
”to
confirm
;
⑤
press 8
,
then press “
”to confirm
;
⑥
You should use
or
till you see “C” in “input sequin mode”, then press
“
”to end setting
;
⑦
press 4
,
then press “
”to confirm
;
⑧
Use
or
till you see “AC” in “input sequin mode”, then press “
”to
confirm
;
⑨
press 6
,
then press “
”to confirm
;
⑩
You should use
or
till you see “Over” in “input sequin mode”, then
press “
”to end setting.
(
5
)
press 1, then press “
”to end the whole setting.
Note: if it is single sequin, it is not necessary to set sequin delivery mode.
10-7
Manual operation of sequin embroidery
It has two ways of operation, collective operation and separated operation.
1.
Collective Operation
Collective operation can be divided into three parts: “sequin start”, “sequin end”
and “Send sequin”.
(1)
Press the key “
” to enter the “Machine Parameter Manage” screen. Then move cursor to
“Assistant Emb Operation” and press “
” to enter that screen. Move cursor to “sequin
start” and press “
”to activate the prompt window, where pressing
is to let all the
sequin presser go down, and pressing “
” is to quit.
(2)
Press the key “
” to enter the “Machine Parameter Manage” screen. Then move cursor to
“Assistant Emb Operation” and press “
” to enter that screen. Move cursor to “sequin
end” and press “
”to activate the prompt window, where pressing
is to let all the
sequin presser go up, and pressing “
” is to quit.
120 BECS- D56 computerized embroidery machine owner’s manual
Summary of Contents for BECS-D56
Page 2: ......