Chapter 2 Operation Instruction
b.
After entering the interface for changing relating parameter of pattern and changing the
parameters, user needs press
to quit the modification mode and return to the main
interface.
c.
If the design’s start point has been saved, the prompt “Move frame to start point” will
appear in the main screen. Click “
”and the frame will automatically return to the start
point.
C.
Assistant Operation
After selecting the design, the user will enter the main screen, and he can do the needed
assistant operations before embroidery.
a.
Set repetition, rotation and magnification and color-changing order
——
click “
” then
“
” to enter the operation interface of design parameter and color-changing order
b.
Set applique embroidery
——
click “
” to enter the design management screen. And
click “
” to set applique according to prompts.
c.
Show the range of embroidery design, embroider along the design range, embroider one
cross, embroider one line and embroider the design outline—— enter the Pattern Outline
Interface.
d.
Auto search start position——press “
” to enter into assistant embroidery
operation menu. Attention: this function is to locate the design in the center of the frame area as
preset in soft limit. If you want set soft limit area, press “
” to enter assistant management
menu.
BECS-D56 computerized embroidery machine owner’s manual
17
Summary of Contents for BECS-D56
Page 2: ......