Chapter 4 Memory Design Management
5.
If choose to move the frame out to the offset position, press
(which is after “To
Offset position?”). If the frame-out is at the fixed distance, firstly press
(which is after
“To Offset position?”), and then press
to set the moving-out distance:
（
2cm
to 99cm
）
or
（
-2cm to -99cm
）
.
6.
Repeat 4 & 5, to set all the applique positions of the design.
7.
Press “
”to save the applique information and return to the screen for selecting the
design operation. Press “
”to cancel operation and return to the screen for selecting design
operation.
4-8
Satin stitch compensation
This operation is to adjust the satin width in the design according to the need.
1.
Press “
”in the main menu to enter the memory design management screen.
2.
Select the design in the memory design image area of the memory design management
screen.
3.
Press the key “
” to enter the satin stitch compensation screen.
4.
If user doesn’t use the default values, press “
” to change them with keyboard.
5.
Press “X (Y) Space Between two Design” to input the new value, and then press “
”to
confirm it.
6.
Press “
”
to adjust the satin width, save it as a new design and return to the design
operation selecting screen. Press “
”to cancel the setting and return to the design operation
selecting screen.
BECS-D56 computerized embroidery machine owner’s manual
43
Summary of Contents for BECS-D56
Page 2: ......
