1
Safety Precautions
Before you install and use HORI 3D printer, be sure to read the following.
Please do not use any methods not described in the user's manual to use the
printer, Try to avoid personal injury and property damage.The printer is just
used for commercial purposes.
1.
When moving the printer, pay attention to gently, avoid touching the inside
of the printer configuration, can carry two people, if necessary;
2.
This printer is suitable for placement in a ventilated, cool, dry and less
dusty environment;
3.
When you use the printer, pay attention to heat, avoid placing on a thick
rug or placed against the wall;
4.
Do not put the printer near flammable materials or high heat;
5.
Do not put the printer over a large vibration or other unstable
environments
;
6.
Do not pile heavy objects on the printer;
○ Use the power standardized
1. Please use the power adapter supplied with the printer;
2. Do not plug the power cord when your hands are wet;
3. When using your plug, make sure fully inserted into the socket;
4. Do not deliberately pull, twist printer lines, to avoid causing open or short
circuit;
○ Note that in the printing process
1. Do not use the printer without the supervision of person;
2. During and immediately after printing is finished, avoid touching the
printer's internal structure and print, to prevent burns;
3. If the printer while printing when smoke, abnormal noise, immediately turn
off the power switch, the printer stops working and contact our customer
service;
○ Often do product maintenance
1. Please do not use any methods not described in the user's manual to
remove or modify the printer
,
to avoid damage to the printer or other more
serious security incidents;
2. Periodically in case of power failure, the printer clean with a dry cloth to
wipe away dirt and bonding printed material. If you must use a damp cloth to
clean, do not use flammable solvents, flammable solvents avoid contact with
the printer's internal circuit causing a fire or electric shock;