SendDataToPrinter(str,3);//
feeds forward paper 0.5mm
ESC d n
[Name]
print and feed paper n lines
[Type]
ASCII
:
ESC d n
Decimal:
27 100 n
Hex:
1B 64 n
[Scope]
0 ≤n ≤ 255
[Explanation]
Print the data in the print buffer and feed paper n lines
[Comment]
• After finishing the printing, this command sets the print starting position to the beginning
of the line.
•
One line distance is 24 vertical pitch (0.125mm)
[Example]
unsigned char str[3];
str[0] = 0x1B;
str[1] = 0x64;
str[2] = 0x4;
SendDataToPrinter(str,3);//
feed forward paper 4 lines
ESC
c
[Name]
To allow/ban reverse printing
[Type]
ASCII
:
ESC
C
n
Decimal: 27
99 n
Hex: 1B
63 n
[Scope]
0 ≤
n
≤ 1
[Explanation]
When n=1,
allow
the
reverse printing and the printing
When n=0, ban
the
reverse printing and the printing
[Comment]
When the printer is vertically installed
, the printer uses the reverse printing way.
Reversely printing not only supports character mode, and also supports graphical mode. When
reversely printing graphics, we should note the printing order of graphics unit. (See the ESC K
command)
[Example]
unsigned char str[3];
str[0] = 0x1B;
str[1] = 0x63;
str[2] = 0x1
SendDataToPrinter(str,3);//
reverse printing
HT
[Name]
horizontal tab
[Type]
ASCII
:
HT
Decimal: 9
Hex: 09
[Explanation]
Move the print position to the next horizontal tab position
[Note]
•
The command is ignored unless the next horizontal tab position has been set.
•
Horizontal tab positions are set with the ‘ESC D’.
Summary of Contents for RD-FH8C7
Page 41: ...B character set 1 and 2 C International standard ASCII ...
Page 43: ......