13
the operation. Check whether the other instruments are normal and work safely.
6) A bunch of cords can be a cause of overheat. Do not use cables in a state of that.
7) Do not step on plugs or give strong impact on them.
8) Do not use inflammables or fire.
C. Cautions during use
1) Stop using the equipment and power off immediately when its malfunction is found.
2) Power off immediately when power is failed. And return operation handles, switches etc. to
the original position.
3) This equipment should not be used in contiguity of patient monitor equipments.
4) Only persons who had special training are allowed to use.
5) The equipment should be used after consulting with a medical specialist.
6) Pay attention to following cautions during use.
1
Check whether there are abnormal conditions in the equipment or patient.
2
If any abnormal condition in the equipment or patient is found, take care of patient first.
3
Then, stop using the equipment. Start reusing after checking patient and the equipment.
4
Not qualified persons, including patient, are not allowed to contact the equipment.
5
Do not use the equipment where chemicals are kept or gas is generated.
D. Cautions after use
1) Power off after returning operation handles, switches etc. to the original position according to
the procedure when operation is finished.
2) Don’t do unreasonable actions (example: holding cord) to cord connection part when
removing cord.
E. Maintenance
1) Do not repair at discretion when out of order. Ask the store or maker.
2) Do not open the case of the equipment or controller.
