1 692 846 001
2017-04-27
|
Beissbarth GmbH
Operation | VLH 4440 | 37
en
6.7
Lowering runway
DANGER – Risk of vehicle falling or tilting
Risk of (fatal) injury on lowering the runway and
the vehicle.
¶
Make sure there is no-one in the vehicle or
in the area of the lifting platform.
¶
Keep away from the lifting platform.
¶
Observe the lifting platform and vehicle.
¶
Make sure both runways are lowered evenly.
DANGER – Risk of crushing when lowering
runway
Risk of (fatal) injury on lowering the runway.
¶
Make sure there is no-one in the area of the
lifting platform.
¶
Keep away from the lifting platform.
1.
Remove all non-secured tools and other objects from
the vehicle and the lifting platform.
2.
Press the "Lift" button (
o
) for approx. 1 second.
The runway moves upwards slightly.
The detent pins are retracted, the runway is
released.
3.
Keep the "Lower" button (
u
) pressed.
The runway moves downwards for as long as the
button is pressed.
Lowering of the runway is stopped automatically
at a height of 120 mm (foot protection safety
level).
4.
Check the area beneath the runway.
5.
If it is safe to do so, press and hold the "Lower"
button (
u
) again.
A warning signal sounds and the runway moves
down to the bottom position.
"
The runway and vehicle are now fully lowered.
6.8
Driving vehicle off
1.
Make sure the runway is completely lowered.
2.
Make sure the automatic roll-off guard on the drive-
on ramp is lowered.
3.
Make sure there are no obstacles in the exit area.
4.
Drive the vehicle off the runway in a straight line.
"
The lifting platform is empty.
6.9
Switch-off
Switch off the VLH 4440 by way of the master switch.
1.
Set the master switch to the OFF (O) position.
2.
Secure to prevent unauthorized switch-on.
"
Lifting platform is deactivated.
