Cleaning
/Disinfection
Operating manual
KINET
V1.4 E
Page 21 of 40
Safety shut-down:
If a button is pressed for more than 20 seconds (e.g. an object is lying on the keypad),
the system is automatically shut off. After removal of the object, the operation of the
unit can be restored by pressing the corresponding button.
Automatic speed control
If the nozzles are blocked (due to soiling), the air flow is automatically reduced.
9 Cleaning/Disinfection
CAUTION
Make sure that the system is not in operation during the cleaning
activities.
CAUTION
After each use, the bath tub must be completely disinfected with a
disinfectant. In this way, any cross-contamination is avoided.
Strictly respect and observe the manufacturer’s instructions for
the used disinfectant.
9.1 Cleaning the tilting bath tub
Clean the
KINET
tilting bath tub with a soft, lint-free cloth, moistened with soapy water
or a standard plastic cleaner. Please do not use abrasives to clean the bath tub!
To avoid damages,
no
aerosol cleaners, sprays, abrasive cleaners or solvents must
be used to clean the keypad.
Please remember that all warranty claims regarding surface damage will not be
accepted, if aggressive cleaning agents are anyhow used.
9.2 Disinfecting the tilting bath tub
You must carefully disinfect and rinse your bath tub after each use to avoid the risk of
transmission and infection. For the manual disinfection of the surface, an isopropyl
alcohol solution or a customary disinfection aerosol (spray) can be used. The tub body
of the
KINET
tilting bath tub is in glass-fibre reinforced plastic and can be disinfected
with a surface disinfectant (not aggressive).
9.3 Sterilising the tilting bath tub
The
KINET
tilting bath tub is
not
suitable for sterilization.
