Operation
Operating manual AVERO Motion
V2.6 E
Page 21 of 48
8.2 During use
8.2.1 Using the AVERO Motion / AVERO Motion E
Using the
button, set the AVERO Motion to the entry position.
If necessary, guide the tub down to the bottom entry height level. Press this button
and hold the button down until the motion automatically switches off
automatically.
Fill the foot space of the AVERO Motion by pressing the button
.
If your tub is equipped with the optional
“automatic water stop”
function, the filling
will automatically stop when it reaches the fill level.
If your tub does not have this option, interrupt the filling process by pressing the
Button again
Make sure to only fill the foot space so that you can open the tub door!
Note!
Check the water temperature by hand (without gloves) or with a
thermometer before the patient steps in the tub.
Open the door to the AVERO Motion.
To open the door, unlock the door lock by turning the lever in a downward motion!
Door lock closed
Direction of lever
movement
Door lock open
Summary of Contents for AVERO Motion
