Unpacking and assembly
AVERO Premium Plus User Manual
V2.4 E
- Page Page
9
of
58
Loosen from the pallet
AVERO Premium Plus
The tub is mounted on the pallet through
the foot by means of a screw.
Unscrew this screw using a cordless
screwdriver and a matching bit, and put
them aside with the washer. Repeat this
on all 4 feet.
After all fasteners are released, you can remove the lifting tub from the pallet and position it in
the intended place of use.
Remove the bubble wrap and stretch film. Make sure that you do not damage the surface of the
tub through the use of tools.
Installation on site
Tools Required:
Spirit level
Adjustable wrench SW 10
With the spirit level and the wrench (SW 10) align the tub so that it is perpendicular. The bath
feet can be adjusted in height by screwing or unscrewing. Make sure that all feet touch the
ground and the tub has a firm footing.