Transport
Operating manual CARLO Alu 230
V2.7 E
Page 13 of 56
5 Transport
Use a lift truck or similar for the transport.
5.1 Unpacking the product
To remove the packaging materials, you will need a cutter knife.
NOTE
Take care so as to not damage the product when using tools.
Do not cut with the cutter in the cardboard.
5.1.1 Removing the cardboard
Proceed in the following way to remove the cardboard:
•
Cut the strap with the cutter knife
•
Remove the strap
•
Lift the cardboard up to remove it and put it aside
5.1.2 Loosening the product from the pallet
The product is on both sides strapped to the pallet.
Proceed in the following way to loosen the product from
the pallet:
•
Unscrew the fixing screws of the straps
•
Remove the straps
•
Please take care not to demage the product
when unscrewing the screws.
•
Please make sure that the brakes of the castors
are released.
brake
After all fixations have been removed, you can remove the product from the
pallet.
The accessories for your product are included in the supplied cardboard box.