Operation
Operating manual CARLO Alu 230
V2.7 E
Page 28 of 56
8.2 Operation of the CARLO ALU
The spreader bar of the CARLO ALU sling hoist is raised or lowered by means of the
handset, which is included in the delivery. The direction of motion is indicated by
symbols. The rear castors have (ease-to-operate) brakes. When lifting a
patient/resident, the brakes of the castors must be activated to avoid any uncontrolled
movement of the CARLO ALU.
Travel path
When using the CARLO ALU, make sure that the travel path of the CARLO ALU is not
narrowed by obstacles or other elements (e.g. wall racks, etc.). Remember also that
the maximum height is limited to 2175 mm. Take extreme care when passing through
door frames.
8.2.1 Explanation of the Functions of the Handset
The different functions of the CARLO ALU can be activated by means of the handset.
Raising and
Lowering the
Spreader Bar
Keep the button
of the handset pressed to raise the spreader bar.
The spreader bar is raised. Release the button as soon as the spreader
bar has reached the desired position. The upward movement of the
spreader bar is stopped.
When the highest possible position is reached, the upward movement
is automatically stopped.
Keep the button
of the handset pressed to lower the spreader bar.
The spreader bar is lowered. Release the button as soon as the
spreader bar has reached the desired position. The downward
movement of the spreader bar is stopped.
When the lowest possible position is reached, the downward movement
is automatically stopped.
If the LED-
indication “MAX” is displayed
the highest possible load
capacity of the CARLO ALU is reached. In such case, lower the patient
and use another sling hoist with a higher load capacity.
Spreading of
the Carrier
Frame
Keep the button
of the handset pressed to spread the carrier frame.
The carrier frame of the CARLO ALU is spread. Release the button as
soon as the desired spread width is reached. The spreading movement
is stopped. When the maximum spreading position is reached, the
movement is automatically stopped.
Keep the button
of the handset pressed to close the carrier frame.
The carrier frame of the CARLO ALU is closed. Release the button as
soon as the desired spread width is reached. The spreading movement
is stopped. When the minimum spreading position is reached, the
movement is automatically stopped.
The spreadable carrier frame highly increases the stability of the sling
hoist.
