Operation
Operating manual SENTA PUR L
V2.5 E
Page 26 of 64
8.5.1 Disassembly of the wings
1. Engage the parking brakes.
2. Lift the wing to be disassembled up until the locking bars situated on the backside
are in central position.
3. Pull the locking bars backwards and remove the locking bars from the frame.
4. Lift the wing further up until you can reach the interlock.
5. Turn the interlock 1/4 of a turn to the left or to the right, so that the locking bolt
latches and the hinges are released.
6. Slide the wing in the direction of the carrier frame and remove the wing.
7. Disengage the parking brakes.
1 & 2
3 & 4
5
8.5.2 Assembly of the wings
1. Engage the parking brakes.
2. Turn the interlock 1/4 of a turn to the left or to the right, so that the locking bolt
latches in the rear position.
3. Slide the wing to be assembled in the guide rails
4. Turn the interlock 1/4 of a turn to the left or to the right, so that the locking bolt
latches in the front position, thus protecting the wing against slipping out.
5. Lift the wing up until you can hang the locking bars in the middle position of the
frame.
6. Have the wing latched into the desired position.
7. Disengage the parking brakes.
1 & 3
2
4 & 5
NOTE:
Please check that the locking bolt is correctly latched and that the
wing cannot be inadvertently slid from the bolts.
8.6 Disassembly/assembly of the side rails
The SENTA PUR L combination bathing lift can optionally be equipped with side rails.
Summary of Contents for SENTA PUR L
Page 54: ...Appendix Operating manual SENTA PUR L V2 5 E Page 54 of 64 14 2 Dimensions of the SENTA PUR L...
Page 55: ...Appendix Operating manual SENTA PUR L V2 5 E Page 55 of 64 14 3 Declaration of conformity...
Page 63: ...Appendix Operating manual SENTA PUR L V2 5 E Page 63 of 64 Your notes...
Page 64: ...BEKA Hospitec GmbH Am R benmorgen 3 35582 Wetzlar Germany Phone Fax 49 0 6 41 9 22 20 0...
