Assembly
/disassembly
Operating manual SENTA PUR L
V2.5 E
Page 49 of 64
13 Assembly/disassembly
13.1 Handset
Unplug the connector of the handset from the control
box and plug it into the new handset.
13.2 Rear castor replacement
Image 1:
Required tools:
1 ratchet 17 mm
1 open-ended spanner
22 mm
1 T-wrench 6 mm
Image 2:
Additional
parts/tools:
1 rear castor
1 thread-locking
fluid (medium tight)
Image 3:
Unscrew the screw
by means of the 22
mm open-ended
spanner.
Image 4:
Remove the castor
from the carrier
frame.
Image 5:
Apply thread-locking
fluid onto the thread
of the new castor.
Caution: The thread-locking fluid must dry at least 3 hours before the device can
be loaded.
Should you use thread lock fluid from another manufacturer, the drying times
specified by this manufacturer must be observed!
Re-assemble in reversed order!
Summary of Contents for SENTA PUR L
Page 54: ...Appendix Operating manual SENTA PUR L V2 5 E Page 54 of 64 14 2 Dimensions of the SENTA PUR L...
Page 55: ...Appendix Operating manual SENTA PUR L V2 5 E Page 55 of 64 14 3 Declaration of conformity...
Page 63: ...Appendix Operating manual SENTA PUR L V2 5 E Page 63 of 64 Your notes...
Page 64: ...BEKA Hospitec GmbH Am R benmorgen 3 35582 Wetzlar Germany Phone Fax 49 0 6 41 9 22 20 0...
