39
Using the
&
or
*
button select
loc clr
in the configuration menu and press
(
which will reveal the sub-menu.
Again using the
&
or
*
button select
the local total reset function
clr tot
and
press
(.
This is required so using the
&
or
*
button select
on
followed by
)
to return to the
clr tot
prompt in the
sub-menu.
Using the
&
or
*
button select the
local grand total reset function
clr gtot
and press
(
.
This is not required so
using the
&
or
*
button select
oFF.
Enter the selection and return to
the
loc clr
prompt in the configuration
menu by pressing the
)
button twice.
See 6.20 and 6.21
Step 16 Reset the grand total to zero
Before completing configuration, the
Rate Totaliser’s composite grand total
should be reset to zero. Using the
&
or
*
button select
CLr
.
Gtot
in the
configuration menu and press
(
which
will cause
CLr. no
to be displayed. Again
using the
&
or
*
button select
CLr YE5
and press
(
which will result in a
0000
display with one digit flashing. This is a
request for the instruction to be
confirmed by entering
5urE
using the
&
or
*
buttons to set each digit and the
(
button to move control to the next
digit.
Pressing
)
will then reset the
composite grand total to zero and return
the instrument to the
CLr
. Gtot
prompt in
the configuration menu.
See 6.23
Step 17 Define the security code
Defining a security code prevents
unauthorised access to the configuration
menu. Using the
&
or
*
buttons
select
CodE
from the configuration menu
and press
(
which will reveal
0000
with
the first digit flashing. This example
requires the security code to be 1209.
Using the
&
or
*
buttons set the
flashing digit to
1
and press
(
to
transfer control to the second digit.
When all have been entered press
)
to
return to the configuration menu.
See 6.24
Step 18 Return to the totalising mode
Configuration of the BA384NG is now
complete. Pressing the
)
button will
save the new configuration and return
the Rate Totaliser to the totalising mode.
The BA384NG will display
dAtA
followed
by
5AVE
while the new information is
stored in permanent memory, which will
be protected from unauthorised
adjustment by the security code.
In the totalising mode, operating the
&
or
*
button will scroll the BA384NG
display between Input-A, Input-b and the
composite display Input-A + Input-b.
