EN / 46
Washing Machine / User’s Manual
12.2.1 Opening the loading door in case of power failure:
NOTE
• In case of power failure, you can use the loading door
emergency handle under the pump filter cap to open the
loading door manually.
WARNING!
• To avoid any water overflow before opening the loading
door, make sure there is no water left inside the machine.
a) Open the pump filter cap.
b) Release the loading door emergency handle
located at the rear side of the filter cap.
c) Pull down the loading door emergency handle
once and open the loading door. After opening
the loading door, re-insert the loading door
emergency handle.
d) If the loading door does not open, try again by
pulling down the handle.
Summary of Contents for 1-WTV9734XW
Page 56: ...www beko com ...