Beko 1573240, User Manual

34 / EN

Washer-Dryer / User’s Manual

5.21.3 Using the Remote 

Control function

After HomeWhiz setup, Bluetooth will turn on 

automatically. To enable or disable the Bluetooth 

connection, please see 5.11.2 Bluetooth 3”.

If you switch your machine off and on 

while Bluetooth is enabled, it will reconnect 

automatically. If the paired device goes out 

of the range, the Bluetooth connection will 

turn off automatically. For this reason, you 

will need to turn on Bluetooth again if you 

want to use the Remote Control function.

You can check the Bluetooth symbol on 

the display to follow the connection status. 

If the symbol is on, this means that the 

Bluetooth connection is established. If 

the symbol is established, the product is 

trying to connect. If the symbol is off, this 

means that you have no connection.

A

 WARNING!

•  If the Bluetooth connection is enabled 

on your product, you can select the 

Remote Control function. If the Remote 

Control function cannot be selected, 

check the connection status. If the 

connection fails, repeat the initial set-

up settings on the appliance.

•  For safety reasons, the product’s door 

will remain locked while the Remote 

Control function is enabled, independently 

of the operating mode. If you want to 

open the door of the product, you will 

need to turn the program selection knob 

or press the Remote Control key to 

disable the Remote Control function.

If you want to control your washing machine 

remotely, enable the Remote Control function 

by pressing the Remote Control button while 

the programme knob is in the Programme 

Download/Remote Control position on the 

control panel. Once the product is accessed, 

you will see a screen similar to the one below.

When Remote Control is enabled, you can 

only manage and switch off the machine 

and follow status on the washing machine. 

All functions except child lock can be 

managed through the application.

You can check the function indicator on 

the key to follow whether the Remote 

Control function is On or Off.

If the Remote Control function is Off, 

all the operations are handled on the 

washing machine and only status follow-

up is allowed on the application.

If the Remote Control function cannot be 

enabled, you will hear a warning after pressing 

the button. This might occur if the product 

is switched on or if there is no product 

paired through Bluetooth. Bluetooth setting 

being Off or the washing machine's door 

being open are examples for such cases.

When you enable this function on the washing 

machine, said function will remain on except 

for certain cases, allowing you to control your 

washing machine remotely via Bluetooth.

In certain cases, it deactivates 

itself for safety reasons:

•  When your washing machine 

undergoes a power interruption.

•  When the programme knob is turned 

to select a different programme or 

when the product is switched off.

5.21.4 Troubleshooting

Follow the steps below if you are having 

problem with controlling or connection. 

Observe whether the problem persists or not 

after the action you have performed. Do the 

following if the problem is not resolved.

•  Check whether your smart device is 

connected to the relevant home network.

•  Restart the product application.

•  Turn Bluetooth off and on through 

the user control panel.

•  If the connection cannot be established 

with the above processes, repeat the initial 

set-up settings on the washing machine.

If the problem persists, consult an 

Authorised Service Agent.