12
6.3.2-Manual tuning of digital
channels and storing in the memory
Press the
MENU
button on your
remote control. Select
CHANNEL
SETUP
by pressing the
Right/Left
movement button and confirm your
selection with
OK
button. Select
Digital Manual Tuning
tab by
pressing the
Up/Down
movement
buttons and press
Right
movement
button or
OK
button to confirm.
Digital Manual Tuning
menu will be
displayed.
Digital Manual Tuning
VHF CH
9
Frequency
205 MHz
Poor Normal Good
Select
Back
Exit
Channel will appear in the list and be stored
in the memory when it is found. Press
MENU
button to return to the previous menu from
the manual search menu or press
EXIT
button to exit the menu.
6.4-Performing Analogue
channel settings
6.4.1-Automatic tuning of analogue
channels and storing in the memory
Press the
MENU
button on your
remote control. Select
CHANNEL
SETUP
by pressing the
Right/Left
movement button and confirm your
selection with
OK
button. Select
Auto Tuning
tab by pressing the
Up/Down
movement buttons and
press
Right
movement button or
OK
button to confirm. Country Selection
menu will be displayed.
CHANNEL SETUP
Please select country and scan type, then press OK to start tuning
Country Selection
England
Scan Type
ATV
Time Zone
London GMT
Select
Back
Exit
ADDITIONAL INFORMATION
Please note that Encrypted channels may
not be stored after scanning in the Digital TV
channels. If this is the case then you will need
to rescan the channels again but this time
change the
LIST SCRAMBLED CHANNELS
from
AUTO
to
ON
:
1
Press Menu.
2
Select Features.
3
Select Digital Features.
4
Select User Interface Options.
5
List Scrambled Channels will show.
Change “Auto” setting to “ON”
6
Press Exit button to exit the Menu.
You will need to rescan the digital TV
channels:
1
Press Menu.
2
Select Setup.
3
Select Auto Tuning and press the OK
button to start the channel scan and this
time store the Scrambled channels.
Enter the channel number from the Manual
search menu using the numeric keys if you
know the channel number; if you don’t
know the channel number, you can perform
search by using
right/left
direction buttons.
Scroll to the
Country Selection
tab by pressing the
Up/Down
movement buttons and press
Right/
Left
movement buttons to select
your country. Then, scroll to the
Scan
Type
tab by pressing the
Down
movement button and select
ATV
option by
pressing the
Right/Left
movement buttons.
Press
OK
button to confirm your selections.
Analogue channels are searched and stored
automatically. At the same moment, the
progress of auto tuning and the channels
stored in the memory are displayed in the
menu.
Program Table
menu is displayed at
the end of the Auto Tuning.
