background image

20

7.2.6-Backlight

With this feature, you can adjust the intensity 

of light reflected to the LCD Panel. Select 

Backlight

 by pressing the 

Up/Down

 

movement buttons and adjust the desired 

level by pressing the 

right/left 

 movement 

buttons.

Note:

 If your TV is equipped with Active 

Contrast feature and this feature is set to On, 

then 

Backlight

 tab is not displayed in the 

menu. 

7.2.7-MPEG NR 

You may remove the artifacts that 

appear in the picture as square shaped 

blocks by using this feature except in 

the Tuner mode.

Select  

Mpeg NR

 tab 

from the Picture menu with the 

up/down

 

movement buttons to activate this feature 

and select one of the 

OFF, LOW, MID

 or 

HIGH

 options with 

right/left

 movement 

buttons.

Note:

MPEG NR feature appears in the menu 

for all sources except the Tuner mode.

7.2.8-Picture Smart

You can select either one of the 

three non-adjustable settings in the 

memory or one of the user options  

by pressing the “(

)“ button on 

your remote control. 

SOFT

NATURAL

RICH

 are default values; 

USER

 represents 

the values you stored in the memory.

7.2.9-Picture Format

With this option, you can view the 

broadcast you watch in a format 

of your choice. You may view 

broadcastings in either 

AUTO

16:9

14:9

4:3

LETTERBOX

SUBTITLE

 

or 

PANORAMA

 formats. 

16:9

14:9

 or 

4:3

 

formats can be selected in 

PC

 modes. In 

that case, the name of the selected picture 

format will be displayed in the centre of the 

screen.

Note:

 In PC Mode, 4:3, 16:9 and 14:9 

picture formats are supported in 16:9 

panels. Only 4:3 picture format is supported 

in 4:3 panels.

7.2.9.1-Auto

Some movie channels may broadcast in 

the 16:9 format. If you would like to see this 

format automatically, then select 

AUTO

In that case, 

AUTO 16:9

 appears on your 

screen.

7.2.9.2-16:9

Please use this setting for watching wide 

screen DVDs, wide screen video cassette 

or 16:9 formatted broadcasts. Since various 

screen formats such as 16:9, 14:9 and etc. 

are used, black stripes might be formed on 

the lower and upper parts of the screen.

7.2.9.3-14:9

This is a movie format.

7.2.9.4-4:3

Use this setting to watch the broadcasts in 

the 4:3 format.

7.2.9.5-Letterbox 

While watching a “16:9 or Cinemascope 

formatted” film or video cassette, this setting 

will eliminate or minimize the black stripes on 

the background by zooming in the picture 

without diffusing it.

Summary of Contents for 32WLU550FHID






































Reviews: