Beko 40WLU530HID, Operating Instructions Manual

16 

6.4.2-Manual tuning of channels and 

storing in the memory
6.4.2.1-If you already know the 

channel number (See page 31)

Press the 

MENU

 button. Move to the 

SETUP

 menu by pressing the 

Down

movement button in the Main Menu and 

MENU

SETUP

SELECT

BACK

SYSTEM

CHANNEL

FINE TUNE

SEARCH

PROGRAM NO

STORE

AUTOPROGRAM

I

S06

0

P13

confirm your selection with the 

OK

 button. Setup menu will be 

displayed. Select system I (for UK 

use) from the 

SYSTEM

 tab. Move 

into 

CHANNEL

 tab by pressing the 

Down

 movement button. Press 

OK

on your remote control to select 

“

S

” for cable channels and “

C

” for 

channels received via the aerial. 

Move onto the 

PROGRAM

NO

tab and using the number buttons 

enter the channel number in which you 

would like to have the channel stored. If the 

broadcast viewed on the screen is of your 

desired quality, first move onto the 

STORE

tab with the down movement button to 

store in the memory the selection you have 

made and store the channel by pressing 

the 

Left

 or 

Right

 movement buttons. The 

prompt 

STORED

 will be displayed briefly. 

The channel will be stored according to the 

program number of your choice. You can 

tune and store in memory other channels the 

same way. In the event that you wish to exit 

the channel settings menu for any reason, 

simply press the 

EXIT

 button.

6.4.2.2-If you do not know the 

channel number

Press the 

MENU

 button. Move 

to the 

SETUP

 menu by pressing 

the 

Down

 movement button in 

the Main Menu and confirm your 

selection with the 

OK

 button. 

Setup menu will be displayed. 

Select the system in which you 

would like to make the search 

from the 

SYSTEM

 tab. Move into 

CHANNEL

 tab by pressing the 

Down

 movement button. Press 

OK

on your remote control to select 

“

S

” for cable channels and “

C

” for 

channels received via the aerial. 

Select 

SEARCH

 tab using the 

Up/Down

movement buttons, and scan the channels 

in ascending order with 

Right

 movement 

button and in descending order with 

Left

movement button. If the channel that is 

found is of your liking, select the 

STORE

 tab. 

Then store it in the memory by pressing the 

Right

 or 

Left

 movement buttons. Repeat 

the same procedure for other channels by 

selecting the program number of your choice 

from the 

PROGRAM NO

 tab. If the channel 

you found is not of the desired quality and 

requires Fine Tuning or if you would like to 

rename the channel, refer to the relevant 

sections.

6.4.3-Fine Tuning

If the channel you found is not of 

the desired quality and requires 

Fine Tuning, then select the 

FINE 

TUNE

 tab by pressing the 

Down

movement button in the Setup 

menu. Using the 

Left/Right

movement buttons on your remote 

control, adjust the broadcast 

displayed on the screen to your desired 

quality. Under normal circumstances, 

you will not require to use the Fine Tune 

function. The AFC values of your television 

will automatically adjust and lock themselves 

to the channel. However, you might need 

it in case the television transmitters do not 

operate according to the standards. To store 

in the memory the settings you have made, 

select the 

Store

 tab and press the 

Right

 or 

Left

 movement button.