INPUT
Your 42” 16:9 PDP-television equipment has VGA inputs, it may also be used as a PC monitor
(Plug&Play).
Connecting the Computer:
Connect your PC to the PC-IN (computer input)
at the back of your television via an appropriate
cable (not supplied with your television).
You may also connect the sound output of your
PC to the PC-DVI/AUDIO IN input at the back
of the television via a proper cable and listen to
sound.
Switching to PC mode
Press the ( ) button on your remote control to
switch from PDP-Television to monitor (PC)
mode. To return to television mode from PC
mode, use the
( )
button on your remote control.
PC Input Settings
In PC mode you can make adjustments to the
picture, these include H Position, V Position,
Phase and Auto position. Press the ( ) button
to display picture menu as shown below.
Press the right
( ) cursor button to enter the
picture menu. Repeatedly press the down
(
)
curson button until the PC picture menu shown
below appears.
You can now make the required adjustmonts. To
exit PC menu press the
( )
button.
H. Position:
Horizontal position setting
V. Position:
Vertical position setting
PHASE:
You may set the colour and shape by
using right/left
(
)/(
) buttons.
Image Format:
You may select one of the
Automatic, 4:3, 16:9, Subtitle, Letterbox,
Panorama formats as PC view image.
You may select using the format button on your
remote control without entering the picture menu.
Automatic Configuration:
The most proper
geometric setting according to the access mode
is configured via this function. Select
AUTOMATIC CONFIGURATION for this
application and press the
(
) button. You may
use the PIP feature in PC mode as described
in the previous sections.
You may adjust the sound of the device you have
connected to the Sound Input at the back of the
television by using
(
), (
)
or
(
)
buttons.
Transition to the DVI mode
Connect your computer or digital video device
via its socket and a proper cable (not supplied
with the television) to the DVI input on the back
of your television. You may also connect the
sound output of your PC or sound device to the
PC-DVI/AUDIO IN input at the back of the
television via a proper cable and listen to sounds.
Please note:
To watch images in DVI mode,
your PC should have a graphic card with DVI
output.
The settings in DVI mode are the same as the
PC mode. However,
automatic configuration
will not function in this mode.
MENU :Cancel
TV :Exit
PICTURE
contrast
color
brightness
hue
noise reduction
sharpness
picture smart
picture format
58
80
50
66
50
Off
User
Auto
MENU :Cancel
TV :Exit
PICTURE
V Position
Phase
H. Position
Auto Position
58
80
50
-31-
Summary of Contents for 42WP300PS
Page 1: ...C O L O U R T E L E V I S I O N S Operating Instructions 42WP300PS ...
Page 36: ... 37 ...
Page 37: ... 38 ...
Page 38: ...AJD 801 ...
