Beko 7001440027, User Manual

21 / EN

Washing Machine / User Manual

4.3.6 Temperature selection

  -
  -
  -
  -
  -

  -

Whenever a new programme is selected, the recommended temperature for the programme appears on the temperature 

indicator. It is possible that the recommended temperature value is not the maximum temperature that can be selected for the 

current programme.

Press the 

Temperature Adjustment button

 to change the temperature. Temperature decreases gradually.

C

No change can be made in programmes where temperature adjustment is not allowed.

You can also change the temperature after the washing starts. This change can be made if the washing steps 

allow it. Changes cannot be made if the steps do not allow it. 

C

If you scroll to cold wash option and press Temperature Adjustment button again, the recommended maximum temperature 
for the selected programme appears on the display. Press the Temperature Adjustment button again to decrease the 
temperature.

4.3.7 Spin speed selection

    -
     -

   -
   -

  -

  -

Whenever a new programme is selected, the recommended spin speed of the selected programme is 

displayed on the 

Spin Speed

 indicator.

C

It is possible that the recommended spin speed value is not the maximum spin speed that can be selected for the current 
programme.

Press the 

Spin Speed Adjustment

 button to change the spin speed. Spin speed decreases gradually.

Then, depending on the model of the product, "Rinse Hold

" and "No Spin 

" options appear on the display.

If you are not going to unload your laundry immediately after the programme completes, you can use 

Rinse 

Hold

 function in order to prevent them from getting wrinkled when there is no water in the machine.

This function holds the laundry in the final rinsing water.

If you want to spin your laundry after the Rinse Hold function:

- Adjust the 

Spin Speed

.

- Press 

Start / Pause / Cancel

. The programme will resume. Machine drains the water and spins the laundry.

If you want to drain the water at the end of the programme without spinning, use 

No Spin

 function.

C

No change can be made in programmes where spin speed adjustment is not allowed.

You can change the spin speed after the washing starts if the washing steps allow it. Changes cannot be 

made if the steps do not allow it. 

Rinse hold

If you are not going to unload your clothes immediately after the programme completes, you can use rinse 

hold function to keep your laundry in the final rinsing water in order to prevent them from getting wrinkled 

when there is no water in the machine. Press Start / Pause button after this process if you want to drain the 

water without spinning your laundry. Programme will resume and complete after draining the water.

If you want to spin the laundry held in water, adjust the Spin Speed and press Start / Pause button.

The programme will resume. Water is drained, laundry is spun and the programme is completed.