background image

DISCLAIMER / WARNING (EN)

Some (simple) defects can be handled correctly by the end user without giving rise to safety 
problems or unsafe use, provided they are carried out within the limits and in accordance with 
the following instructions (see chapter “Self-repair”) .

For this reason, unless otherwise permitted in the “Self-Repair” section below, repairs must be performed by 
registered professional technicians to avoid safety issues. A registered professional mechanic is a 
professional mechanic who has been granted access to the instructions and spare parts list of this product 
by the manufacturer, in accordance with the methods described in legal acts in accordance with Directive 
2009/125/EC.

However, the maintenance and repair work under the warranty conditions may only be carried 
out by the specialized representative (ie authorized professional technicians) who can be 
reached at the telephone number indicated in the user manual/warranty card or via your 
authorized dealer. For this reason, repairs performed by professional technicians (not 
authorized by Beko) will void the warranty.

Self-repair

The self-repair can be performed by the end user with regard to the following spare parts: door, hinges 
and seal, other seals, door lock assembly and plastic peripherals such as detergent compartments (an 
updated list will also be made available on support.beko.com from 1 March 2021).

In addition, to ensure the safety of the product and to avoid the risk of serious injury, the stated self-
repair must be performed in accordance with the instructions in the self-repair manual or available at 
support.beko.com. For safety reasons, disconnect the power plug from the product before attempting 
any self-repair.

Repairs and attempted repair by end users of parts not included in this list and/or where the 
instructions in the self-repair manual or available on support.beko.com are not followed, may 
result in security issues that cannot be assigned to Beko and they will void the warranty of the 
product.

For this reason, we strongly advise against end-users attempting to make repairs on their own 
that fall outside the specified spare parts list and, in such situations, relying on an authorized 
professional mechanic or registered professional mechanics. However, such attempts by end 
users may cause safety issues and damage to the product and result in fire, flooding, electric 
shock and serious personal injury.

For example, but not limited to, the following repairs should be performed by authorized professional 
mechanics or registered professional mechanics: motor, pump assembly, motherboard, motor panel, display 
panel, heater, etc.

The manufacturer/seller cannot be held liable if end users do not follow the above instructions.

The availability of the spare parts of the washer or washer-dryer you have purchased is 10 years. During this 
period, the original spare parts are available for the correct operation of the washing machine or washer-dryer 
combination.

Summary of Contents for 7145745700





























Reviews: