Beko 7188235500, User Manual

 15

Dryer / User Manual

Allergy UK is the brand of the 

British Allergy Association. Seal 

of Approval is created to guide 

people that require 

recommendation about a 

product that the related 

product restricts / reduces / eliminates the 

allergens or reduces the allergen content 

significantly in the ambient where allergy 

patients exist. It aims to provide assurance 

that the products are tested scientifically or 

examined in a way to provide measurable 

results.

5.5 Auxiliary functions

Buzzer / time

Drying machine makes an audible warning 

when the program is completed. If you don’t 

want the machine to make an audible warning, 

press the “Buzzer / Time” button. When you 

press the Buzzer/Time button, a light will 

illuminate and no audible warning will be made 

when the program ends.

C

NOTE

•  You can select this function before or 

after the program starts.

Buzzer/Time button is used to adjust program 

duration while the Rack/Time programs are 

selected.  

Drying Level

Drying Level button is used for adjusting to 

desired dryness level. Program duration may 

change depending on the selection.

C

NOTE

•  You can activate this function only prior 

to start of program.

End time

You can delay the end time of the program up 

to 24 hours with End time function. 

1.  Open the loading door and place the 

laundry.

2.  Select the drying program.

3.  Press the End Time selection button and 

set the delay time you wish. End Time 

LED will illuminate. (When pressed and 

hold the button, End Time proceeds non-

stop).

4.  Press the Start / Stand-by button. End 

Time countdown starts. “:” Separator in 

the middle of displayed delay time flashes.

C

NOTE

•  You can add or remove laundry within 

end time. Displayed time is the sum of 

normal drying time and end time. End 

Time LED will turn off at the end of 

countdown, drying starts and drying LED 

will illuminate. 

Changing the end time

If you want to change the duration during the 

countdown:

Cancel the program by turning the On/Off/

Program selection knob. Select the program 

you want and repeat the End Time selection 

process.

Cancelling the end time function

If you want to cancel the end time countdown 

and start the program immediately:

Cancel the program by turning the On/Off/

Program selection knob. Select the program 

you want and press the Start/Stand-by button.

5.6 Warning indicators

C

NOTE

•  Warning indicators may vary depending 

on the model of your dryer.

Filter cleaning

When the program is completed, the warning 

indicator for filter cleaning turns on.

Water tank

When the program is completed, the warning 

indicator to empty the water tank turns on.

If the water tank fills up while the program 

continues, the warning indicator starts flashing 

and the machine goes into stand-by. In this 

case, empty the water tank and start the 

program by pressing the Start / Stand-by 

button. Warning indicator turns off and program 

resumes.