Beko 7188235500, User Manual

16

Dryer / User Manual

Filter drawer /Heat exchanger cleaning

When the programme is finished, the cleaning 

symbol of the heat exchanger or filter drawer 

may light up.

5.7 Starting the program

Press the Start/Stand-by button to start the 

program.

Start/Stand-by and Drying indicators will 

illuminate to indicate that program started.

5.8 Child Lock

The drying machine has a child lock which 

prevents the program flow from being 

interrupted when the buttons are pressed 

during a program. When the child lock is 

activated, all buttons on the panel except 

the On/Off/Program selection knob are 

deactivated.

Press the Drying Level and Buzzer buttons 

simultaneously for 3 buttons to activate the 

child lock. 

The child lock has to be deactivated to be 

able to start a new program after the current 

program is finished or to be able to interfere 

with the program. To deactivate the child lock, 

keep the same buttons pressed for 3 seconds.

C

NOTE

•  When the child lock is activated, the child 

lock warning indicator on the screen 

turns on.

•  Child lock deactivates when the drying 

machine is turned off and on by the On/

Off/Cancel knob.

C

NOTE

•  When the drying machine runs and 

the child lock is active, it beeps twice 

when the program selection knob is 

turned. If the child lock is deactivated 

without returning the program selection 

knob to its previous position, program 

will terminate due to the change in the 

program selection knob position.

5.9 Changing the program after it is 

started

You can change the program you selected to 

dry your laundry with a different program after 

the drying machine starts running

•  For instance, select Extra Dry program 

by turning the On/Off/Program selection 

knob to select Extra Dry instead of Iron 

Dry.

•  Press the Start/Stand-by button to start 

the program.

Adding and removing clothes during 

stand-by

If you want to add or remove clothes to/from 

the drying machine after the drying program 

starts:

•  Press the Start/Stand-by button to put 

the drying machine in Stand-by state. The 

drying operation stops.

•  Open the loading door while in Stand-

by state, and close the door after you 

remove or add laundry.

•  Press the Start/Stand-by button to start 

the program.

C

NOTE

•  Adding laundry after the drying operation 

starts may cause the dried laundry inside 

the machine to mix with wet laundry and 

leave the laundry damp at the end of 

operation.

•  Adding or removing laundry during drying 

may be repeated as many times as you 

wish. But this operation continuously 

interrupts the drying operation, and thus 

increases program duration and energy 

consumption. So, it is recommended to 

add laundry before the program starts.

•  If a new program is selected by turning 

the program selection knob while the 

drying machine is in stand-by, the 

running program terminates.

WARNING! 

•  Do not touch the inner surface of the 

drum while adding or removing clothes 

during a continuing program. The drum 

surface is hot.