11 / 30EN
Refrigerator / User Guide
Installation
2.
Attach 2 plastic wedges on the ventilation cover as
shown in the figure.
4.4 Adjustment of the feet
If the product is not in balanced position, adjust the
front adjustable stands by rotating right or left.
4.5 Electrical connection
A
WARNING:
Do not use extension or
multi sockets in power connection.
B
WARNING:
Damaged power cable
must be replaced by Authorized
Service.
•
Our firm will not assume responsibility for any
damages due to usage without earthing and
power connection in compliance with national
regulations.
•
The power cable plug must be easily
accessible after installation.
C
Hot surface warning!
The side walls of your product are
equipped with cooler pipes to enhance
the cooling system. High pressure fluid
may flow through these surfaces, and
cause hot surfaces on the side walls.
This is normal and it does not require
servicing. Be careful when you contact
these areas.