9 / 41EN
Refrigerator / User Manual
Installation
In order to adjust the doors vertically,
•Loosen the fixing nut at the bottom
•Screw adjusting nut (CW/CCW)
according to the position of the door
•Tighten the fixing nut for the final
position
In order to adjust the doors horizontally,
•
Loosen the fixing bolt on the top
•
Screw the adjusting bolt (CW/CCW) on
the side according to the position of
the door
•
Tighten the fixing bolt on the top for
the final position.
3.7. Water connection
ASP341 models only
(This feature is optional)
Water system installation of the
refrigerator must be performed by a
competent person.
Depending on the model of the
refrigerator, you may not have to
connect to water main.First you
must connect the water hose to the
refrigerator.
Check that following parts have been
delivered together with the product:
1.
Union for connecting the water hose to
the rear of the refrigerator
2.
3 pieces of pipe clips (used to secure
the water hose)
adjusting nut
fixing nut
fixing nut
adjusting nut
3.5. Illumination lamp
Do not attempt to repair yourself but call
the Authorised Service Agent if the LED
illumination lamps do not go on or are
out of order.
3.6. Door open warning
(This feature is optional)
An audio warning signal will be given
when the door of your product is left
open for 1 minute. This warning will be
muted when the door is closed or any of
the display buttons (if any) are pressed.
3
1
4
2
*5
c
a
a
b
1
2