Air purifier / User Manual
17 / EN
7
Troubleshooting
Fault description
Possible reasons
Solution
Fail to start up.
Whether the outlet is electrified
or not?
Check the power supply.
Whether the power plug is
plugged properly or not?
Plug the power supply properly.
No blow-off of air
Whether air inlet or air outlet
is blocked by foreign matters
or not?
Replace position or remove
foreign matters.
The motor does not run.
Contact the product agent.
Not achieving the clean effect
Whether the machine is
installed at a unventilated
position or there is obstacle
nearby?
Remove the obstacle.
The multi-functional compound
screen has not been replaced
for a long time.
Replace the multi-functional
compound screen.
Peculiar smell at the air outlet
Whether a large amount of
smell is generated temporarily?
For instance, when many people
smoke, etc.
The smell disappears gradually
after running for a certain time.
Whether the multi-functional
compound screen is not
replaced after being used for
a long time? (In accordance
with different operating
environments, sometimes the
multi-functional compound
screen shall be aired or replaced
within several months and even
several weeks.)
Place the multi-functional
compound screen in the place
with sufficient sunlight or good
ventilation for about 6 hours
to evaporate moisture in it, but
be sure not to place it under
burning sun for exposure so to
avoid deformation of the multi-
functional compound screen,
because the deformation will
affect the performance of the
machine.
Replace the multi-functional
compound screen.
Summary of Contents for ATP8100
Page 1: ...Air Purifier User Manual ATP8100 EN DE FR IT RO ...
Page 91: ......
Page 92: ......
Page 95: ...www beko com Arçelik A Ş Karaağaç Caddesi No 2 6 34445 Sütlüce İSTANBUL ...