EN
20
Auxiliary functions
Auxiliary function selection keys
• Depending on the program, you can
select the desired auxiliary function
by pressing the keys 11a, 11b, 11c,
11d.
• Select the required auxiliary
functions before starting the
program.
• Some combinations cannot be
selected together. (Ex.: Prewash
(Figure 2-11a) and Quick Wash
(Figure 2-11b).
• Symbol of the selected auxiliary
function (Figure 3-13l) will light up.
Auxiliary function selection
If an auxiliary function that should not
be selected together with a previously
selected function is chosen, the first
selected function will be cancelled and
the last auxiliary function selection will
remain active.
(Ex.: If you want to select prewash first
and then quick wash, prewash will be
cancelled and quick wash will remain
active.
Auxiliary function that is not compatible
with the program cannot be selected.
(see, “Program Selection Table”)
Prewash
When you select this function (11a), the
display will indicate “F1” symbol.
• A prewash is only required with
heavily soiled laundry. Without
prewash you save energy, water,
detergent and time.
• Prewash without detergent is
recommended for veils and curtains.
Quick wash
With this program (11b), the wash time
is shortened. “F2” symbol will light up on
the display.
• Use this function for smaller
amounts or slightly soiled laundries.
Extra rinse
This function (11c) allows your machine
to perform an extra rinsing in addition
to the rinsing cycles performed by your
machine after main washing cycle.
Thus, the risk for sensitive skins (babies,
allergic skins and etc.) to be effected by
the minimal detergent remnants on the
laundry is reduced. “F3” symbol will light
up on the display.
Anti-creasing
With this function (11d), boiler
movement will be lessened to prevent
creasing and spinning speed is limited.
In addition, washing is carried out at a
higher water level. “F4” symbol will light
up on the display.
• Use this function for delicate
laundries that crease easily.
C
Whenever you select this auxiliary
function, load your machine with
half of the maximum laundry amount
specified in the program table.
Time screen
The display shows the time remaining
for the program to complete while a
program is running. Time is displayed in
hours and minutes as “01:30”.
• Program duration may differ from
the values in the consumption
table subject to the changes in the
water pressure, water hardness and
temperature, ambient temperature,
type and amount of laundry, auxiliary
functions selected, and changes in
the supply voltage.
11a
11b
11c
11d
