background image

EN

34

Detergent 

residue in the 

dispensing 

drawer.

Detergent may have been 

put in wet dispenser 

drawer.

Dry the detergent drawer before putting in 

detergent.

Detergent may have 

gotten damp.

Store detergent in a closed and dry place. Do 

not keep them under high temperatures.

Water pressure might be 

low
The detergent in the main 

wash compartment might 

have gotten wet while 

taking in the prewash 

water..

The detergent dispenser outlet (holes) may have 

a problem. 

There might be problems with the detergent 

dispenser valves.

Detergent might be mixed 

with the bleaching agent.

Softener should not come into contact with 

detergent when being added.

There is 

detergent left 

on the laundry.

Excessive laundry might 

have been loaded in.

Do not load the machine in excess.

Wrong program and 

temperature might have 

been selected.

Select the proper program and temperature for 

the laundry to be washed.

Wrong detergent may 

have been used.

Use wool detergents for woolens.

There is too 

much foam.

You may not be using 

proper detergent for 

automatic washing 

machines.

Use only automatic washing machine 

detergents in your washing machine.

Excessive amount of 

detergent may have been 

used.

Use only sufficient amount of detergent.

Too much detergent may 

have been used for a 

small amount of lightly 

soiled laundry.

Use only sufficient amount of detergent.

Detergent may have been 

stored improperly.

Store detergent in a closed and dry location. Do 

not store in excessively hot places.

Type of material being 

washed (lace items will 

cause excessive foam due 

to their meshed structure).

Use smaller amounts of detergent for lace 

items.

Detergent might have 

been put in the wrong 

compartment.

If you put detergent in the prewash 

compartment although you have not selected 

a prewash cycle, the machine can take this 

detergent during rinsing or softener step.

Softener being released 

early.

You may have added too much softener.

 

The detergent dispenser might be problematic. 

Water may be siphoned (pulling the softener 

into the washer early) during the fill or rinse 

cycles. 

There might be problems with the valves.

Summary of Contents for AUTOMATIC WASHING MACHINE WMA 647 S







































Reviews: