Beko B3RCNE364HW User Manual Download

Page: 22 / 80

EN / 22

• On the products without a No-Frost fea-

ture, water droplets and icing up to a
thickness of a finger may occur on the
rear wall of the freezer compartment. Do
not clean, and never apply oils or similar
materials.

• Use a mildly dampened micro-fibre cloth

to clean the external surface of the
product. Sponges and other types of
cleaning clothes may cause scratches.

• To clean all removable components dur-

ing the cleaning of the interior surface of
the product, wash these components with
a mild solution consisting of soap, water
and carbonate. Wash and dry thoroughly.
Prevent contact of water with illumination
components and the control panel.

CAUTION:

Do not use vinegar, rubbing alcohol
or other alcohol based cleaning
agents on any interior surface.

Stainless Steel External Surfaces

Use a non-abrasive stainless steel cleaning
agent and apply it with a soft lint-free cloth.
To polish, gently wipe the surface with a
micro-fibre cloth dampened with water and
use dry polishing chamois. Always follow
the veins of the stainless steel.

Preventing Odours

The product is manufactured free of any
odorous materials. However, keeping the
food in inappropriate sections and improper
cleaning of internal surfaces may lead to
odours.
• To avoid this, clean the inside with car-

bonated water every 15 days.

• Keep the foods in sealed holders, as mi-

cro-organisms arising from foods kept in
unsealed containers will cause bad
odour.

• Do not keep expired and spoilt foods in

the refrigerator.

Protecting Plastic Surfaces

Oil spilled on plastic surfaces may damage
the surface and must be cleaned immedi-
ately with warm water.

9 Troubleshooting

Check this list before contacting the ser-
vice. Doing so will save you time and
money. This list includes frequent com-
plaints that are not related to faulty work-
manship or materials. Certain features
mentioned herein may not apply to your
product.

The refrigerator is not working.

• The power plug is not fully settled. >>>

Plug it in to settle completely into the
socket.

• The fuse connected to the socket power-

ing the product or the main fuse is blown.
>>> Check the fuse.

Condensation on the side wall of the
cooler compartment (MULTI ZONE,
COOL CONTROL and FLEXI ZONE).

• The door is opened too frequently. >>>

Take care not to open the product's door
too frequently.

• The environment is too humid. >>> Do

not install the product in humid environ-
ments.

• Foods containing liquids are kept in un-

sealed holders. >>> Keep the foods con-
taining liquids in sealed holders.

• The product's door is left open. >>> Do

not keep the product's door open for long
periods.

• The thermostat is set to a very cool tem-

perature. >>> Set the thermostat to an
appropriate temperature.

Compressor is not working.

• In case of sudden power failure or pulling

the power plug off and putting back on,
the gas pressure in the product's cooling
system is not balanced, which triggers
the compressor thermic safeguard. The
product will restart after approximately 6
minutes. If the product does not restart
after this period, contact the service.