Beko B3T4924D, User Manual

24 

Dryer / User manual

Adding laundry after the drying 

operation starts may cause the 

dried laundry inside the drying 

machine to mix with wet laundry 

and leave the laundry damp at the 

end of operation.

Adding or removing laundry 

during drying may be repeated as 

many times as you wish. But this 

operation continuously interrupts 

the drying operation, and thus 

increases program duration and 

energy consumption. So, it is 

recommended to add laundry 

before the program starts. 

If a new program is selected by 

turning the program selection 

button while the drying machine is 

in stand-by, the running program 

terminates.

Do not touch the inner surface of 

the drum while adding or removing 

clothes during a continuing 

program. The drum surface is hot.

6.10 Cancelling the program

If you want to cancel the program and 
terminate the drying operation for any reason 
after the drying machine starts running, Pause 
the program and turn the On/Off/Program 
Selection button; the program terminates.

The inside of the drying machine 

shall be extremely hot when you 

cancel the program during machine 

operation, so run the refreshing 

program to allow it to cool down.

6.11 End of program

When the program ends, the LED’s of End/

Wrinkle Prevention and Fibre Filter Cleaning 

Warning on the program follow-up indicator 

turn on. Loading door can be opened and 

drying machine is ready for another operation.
Turn the On/Off/Program Selection button to 

On/Off position in order to turn off the drying 

machine.

If the Wrinkle Prevention mode 

is active and the laundry is not 

removed after the program is 

completed, the wrinkle prevention 

function activates for 2 hours to 

prevent the laundry inside the 

machine to get wrinkled. The 

program tumbles the laundry with 

10-minute intervals to prevent them 

from wrinkling.

6.12 Odour feature

If your drying machine has odour feature, read 

the ProScent manual to use this feature.

6.13 SteamCure Odour and 

Wrinkle Removal Function

SteamCure is a refresher function that helps 

ironing the dry clothes that worn very little and 

aims to reduce airborne (cigarettes, food, etc.) 

odours.
It is recommended to wash the clothes to 

remove odours that can be absorbed by them 

such as perfumes, deodorants and sweat.
Do not dry products that includes sharp or hard 

accessories and leather.

Filling the water tank

1 blue wing in the machine performs the 

process of watering the laundry.
If the wing is on top, you can manually rotate 

the drum to the lower position and fill the water.  
Before using the Steamcure program, the water 

in the filling container at max. Level must be 

filled manually into the wing.
To remove wrinkles, tap or drinking water 

should be used. 
A few drops of water that may overflow from 

the wing during filling will not cause any 

problem.