Beko B3T4924D, User Manual

31 

Dryer / User manual

The lighting inside the drying machine does not turn on. (In models with lamp)
The drying machine might not have been turned on using On/Off button. >>> Check that the drying 
machine is turned on.
Lamp might be malfunctioning. >>> Contact Authorized Service to replace the lamp.
Wrinkle prevention icon or light is lit. 
Anti-Crease mode that prevents the laundry in the drier to crease may be activated. >>> Turn the drier off 
and remove the laundry

.

Fibre filter cleaning icon is lit.
Fibre filter (interior and exterior filter) may be unclean. >>> Wash the filters with warm water and dry..
A layer may be formed on the fibre filter pores that leads to clogging. >>> Wash the filters with warm 
water and dry.
A layer that may cause clogging of the pores of the fibre filters (internal and external filters) may have 
occurred.<<Wash and dry the filters with lukewarm water>>
Fibre filters may not be inserted. >>> Insert the interior and exterior filters to their places.
Environmentally-friendly filter cloth may not be installed on the plastic part and the front of the condenser 
may have clogged.>>>Install the environmentally-friendly filter to the plastic part and place it on the filter 
housing.
Environmentally-friendly filter may have not been replaced although the warning  
symbol is illuminated. “Replace your filter.”
An audible warning is heard from the machine
Fibre filters may not be inserted. >>> Insert the interior and exterior filters to their places.
Filters of the machine may not have been installed.>>> Install the fibre filters (internal and external) or the 
environmentally-friendly filter to their housing.
Condenser warning icon is flashing.
Condenser front side may be clogged with fibres. >>> Clean the front side of the condenser.
Fibre filters may not be inserted. >>> Insert the interior and exterior filters to their places.
The lighting inside the drying machine turns on. (In models with lamp)
If the drying machine is plugged to the power outlet, the On/Off button is pressed and the door is open; 
the light turns on. >>> Unplug the drying machine or bring the On/Off button to Off position.
Wifi icon flashes continuously. (for models featuringHomeWhiz Function)
 >>> The product may not be connected to the wireless network. Follow the instructions to connect 
to the network. The device which the product utilize to connect to network may be faulty. Check it.The 
product may not be connecting to the network due to proximity.
If you see the “F L t” message on the screen, please follow the steps below.
Filters may be dirty. Clean internal and external filters or replace the eco-friendly filter.
If you use double filter, as an internal and external filter, on the cover area, ensure that both filters are 
installed.
If you use the eco-friendly filter feature, ensure that the filter cloth is installed to the plastic part. Install the 
filter cloth to the plastic part if it is not installed.
The are in front of the condenser may be dirty. Open and inspect the toe board area and ensure that it is 
clean. Refer to the Maintenance and Cleaning section.

If the problem persists after following the instructions in this section, contact your vendor or an 
Authorized Service. Never try to repair your product yourself.

If you experience any issue with your device, you can request a replacement by consulting to 
the nearest authorised service with the device model number.