25 / EN
Washing Machine / User’s Manual
• Bluetooth 3’’
You can use the bluetooth connection function to pair your machine with your smart device. This way, you can use your smart
device to get information about your machine and control it.
To activate bluetooth connection:
Press and hold Remote Control function button
for 3 seconds. Countdown
“3-2-1”
will be displayed,
and then Bluetooth icon will appear on the display. Release
Remote Control function button
. The bluetooth
icon will flash while the product is pairing with smart device. If connection is successful, icon will remain on.
To deactivate bluetooth connection:
Press and hold Remote Control function button
for 3 seconds. Countdown
“3-2-1”
will be displayed,
and then Bluetooth icon will disappears on the display.
C
First setup of the HomeWhiz application must be complete for the bluetooth connection to be activated. After setup, pressing
the remote control function button while the knob is at Download Programme/Remote Control position will automatically
activate the bluetooth connection.
4.3.9 End Time
Time display
Remaining time for the completion of the programme while it is running is displayed as “01:30” in hours and
minutes format.
C
Programme time may differ from the values in section "Programme and consumption table" depending on the water
pressure, water hardness and temperature, ambient temperature, amount and the type of laundry, auxiliary functions selected
and the changes at the mains voltage.
With the
End Time
function, the startup of the programme may be delayed up to 24 hours. After pressing
End
Time
button, the programme's estimated ending time is displayed. If the
End Time
is set,
End Time
indicator
is illuminated.
In order for the End Time function is activated and the programme is completed at the end of the specified
time, you must press
Start/Pause
button after adjusting the time.
If you want to cancel End Time function, turn the knob to
on and off
position. machine.
C
When you have activated the End Time function, do not add liquid detergent in the powder detergent compartment no 2.
There is the risk of staining of the clothes.
1 Open the loading door, place the laundry and put detergent, etc.
2 Select the washing programme, temperature, spin speed and, if required, the auxiliary functions.
3 Set the end time of your choice by pressing the
End Time
button.
End Time
indicator illuminates.
4 Press
Start / Pause
button. Time countdown starts. “:” sign in the middle of the end time on the display
starts flashing.
C
Additional laundry can be added into the machine during the End Time countdown. At the end of the countdown, End Time
indicator turns off, washing cycle starts and the time of the selected programme appears on the display.
4.3.10 Starting the programme
1 Press
Start / Pause
button to start the programme.
2 The
Start / Pause
button's light which was off before starts to illuminate steadily now, indicating that the
programme has started.
Summary of Contents for B3WFU7922WB
Page 80: ...1911861577_AA_EN_RO ...
