50 / 57 TR
Television / User Manual
DETAILED CHANNEL SETTINGS
----------------------------------------------------
Tuning analogue television chan-
nels
This setting is only necessary if you have not
carried out an analogue search during the first
time installation.
The television channel can be set directly or
using the search.
Switching the television to analogue
channels
Note:
7
Analog channels can only be selected
while »Air« or »Cable« sources are active.
1
Open the »Input Source« menu with »
«.
2
Select »ATV« using »
V
« or »
Λ
« and con-
firm with »
OK
«.
Note:
7
Additional operations are explained in the
following sections.
Re-tuning all analogue television
channels
Note:
7
Plug the rooftop antenna cable (for ana-
logue television stations) into the
RF IN T2
socket on the television.
1
Press »
MENU
« to open the menu.
2
Press »
<
« or »
>
« to select the »CHANNEL«
menu and press »
OK
« to confirm.
– »CHANNEL« menu is now enabled.
3
Select »Auto Tuning« with »
V
« or »
Λ
« and
confirm with »
OK
«.
– »Tuning Setup« menu will be displayed.
MENU
ENTER
Tuning Setup
Back
Start
Tune Type
ATV
Country
Turkey
Symbol Rate
Auto
Frequency
Auto
Network ID
Auto
Scan type
DVB-T
Scan Type
Full
4
Select »Tune Type« with»
V
« or »
Λ
« and
select »ATV« with »
<
« or »
>
«.
5
Go to »Country« with »
V
« or »
Λ
« and
select the country with »
<
« or »
>
«.
6
Press »
OK
« to start the search.
– The »Channel Tuning« menu will be
displayed and the search for TV channels
will start.
– Search may take several minutes depend-
ing on the number of television channels
received.
Note:
7
The search can be aborted with »
EXIT
«.
7
Press »
EXIT
« to end searching.
