Beko B5T4923RW, User Manual

16 

Dryer / User manual

4.3 Water connection

Instead of periodically draining the water 

accumulated in the water tank, you can 

discharge via the water discharge hose 

supplied with the drying machine.

Connecting the water drainage hose

1

3

4

2

1-2 Remove the 

hose behind the 

drying machine 

by pulling it 

manually from 

where it is 

attached. Do 

not use a tool 

to remove the 

hose. 

3  Insert one end of the water discharge hose 

supplied with the drying machine to where 

you have removed the hose on the drying 

machine.

4  Fix the other end of the water discharge 

hose to directly waste water drainage or a 

sink. 

NOTICE

The water discharge hose shall be 

fixed at maximum 80 cm height.

Ensure that the water discharge 

hose do not get kinked, collapsed 

or pressed on between the 

discharge and the drying machine.

Hose shall be connected not to 

be disconnected from its location. 

Leaked water may cause damage.

Do not extend the water drainage 

hose.

Check whether the water runs at an 

appropriate flow. The drainage line 

shall not be closed or clogged.

If an accessory package is provided 

with your product, check the 

detailed instructions.

4.4 Adjusting the stands

Until the drying 

machine stands level 

and sturdy, adjust 

the stands by turning 

them left and right.

4.5 Moving the drying machine

•  Drain the water in the drying machine 

completely.

•  If the product is connected via direct 

discharge, remove the hose connections.

The drying machine is 

recommended to be moved in 

upright position. Otherwise, tilt it to 

the right side when viewed from the 

front and move the drying machine.

Wait 12 hours prior to operating the 

drying machine.

4.6 Warning regarding the noise

As the product is 

operated, metallic 

noises may come 

from the compressor 

from time to time, it is 

normal.

When the product is operated, 

the accumulated water is pumped 

to the water tank. It is normal to 

hear pumping sounds from the 

appliance during this operation.

4.7 Replacing the lighting bulb

If your drying machine has drum lighting lamp;
Consult the authorized service to replace the 

bulb/LED used in lighting your drying machine. 

The bulb in this product is not suitable for home 

lighting.  The intended use of this lamp is to 

ensure safely loading the laundry to the drying 

machine. The lamps used in this appliance is 

resistant to heavy physical conditions such as 

temperatures over 50°C.