Beko B5T4923RW, User Manual

23 

Dryer / User manual

6.6 Warning indicators

Warning indicators may vary 

depending on the model of your 

drying machine.

Filter cleaning

When the program is completed, the warning 

indicator for filter cleaning turns on.

Water tank

If the water tank fills up while the program 

continues, the warning indicator starts flashing 

and the machine goes into stand-by. In this 

case, empty the water tank and start the 

program by pressing the Start / Stand-by 

button. Warning indicator turns off and program 

resumes.

Cleaning of filter drawer/

heat exchanger

Warning symbol flashes periodically to remind 

that filter drawer must be cleaned.

6.7 Starting the program

Press the Start/Stand-by button to start the 

program.
Start/Stand-by and Drying indicators turn on to 

show that program started.

6.8 Child Lock

The drying machine has a child lock which 

prevents the program flow from being 

interrupted when the buttons are pressed 

during a program. When the Child Lock is 

activated, all buttons on the panel except 

the On/Off/Program Selection button are 

deactivated.
Press the Audible Warning button for 3 

seconds in order to activate the child lock. 
The child lock has to be deactivated to be 

able to start a new program after the current 

program is finished or to be able to interfere 

with the program. To deactivate the child lock, 

keep the same buttons pressed for 3 seconds.

When the child lock is activated, 

the child lock warning indicator on 

the screen turns on. 

When the child lock is active:
The drying machine runs, or in stand-by state 

the indicator symbols will not change upon 

changing the position of the program selection 

button.

When the drying machine is 

operated and the child lock is 

active, if the program selection 

button is turned, a double beeping 

noise will be heard. If the child lock 

is deactivated before the program 

selection button is turned to its 

original place, the program will 

be terminated since the program 

selection button is displaced.

6.9 Changing the program 

after it is started

You can change the program you selected to 

dry your laundry with a different program after 

the drying machine starts running.

•  For example, Pause the program and turn 

the On/Off/Program Selection button to 

select the Extra Dry program in order to 

select the Extra Dry program instead of 

Ironing Dryness.

•  Press the Start/Stand-by button to start 

the program.