EN / 35
6.15.3 Remote Control Function
and Using It
Bluetooth is automatically turned on after
setting up HomeWhiz. To activate or deac-
tivate the Bluetooth connection, please see
Bluetooth 3’’’.
If you turn off and on your machine while
bluetooth is active, it will automatically re-
connect. In cases such as paired device go-
ing off the range, bluetooth will automatic-
ally turn off. For this reason, you will need
to turn on the bluetooth again if you want to
use the Remote Control function.
You can check the bluetooth symbol on the
display to track your connection status. If
the symbol is continuously on, you have
bluetooth connection. If the symbol is
flashing, the product is trying to connect. If
the symbol is off, it means you are not con-
nected.
If the Bluetooth connection is
turned on in your product, then the
Remote Control function can be se-
lected.
If the Remote Control function can-
not be selected, check the connec-
tion status. If the connection can-
not be established, repeat the initial
setup settings on the appliance.
NOTICE:
For safety reasons, the
product’s door will remain locked
while the Remote Control function
is enabled, independently of the op-
erating mode. If you want to open
the door of the product, you will
need to turn the programme selec-
tion knob or press the remote con-
trol key to deactivate the remote
control function.
If you want to control your washing ma-
chine remotely, you need to activate the Re-
mote Control function by pressing the Re-
mote Control button while the programme
knob is in the Download Programme/Re-
mote Control position button on the control
panel of your washing machine after clos-
ing the front door. Once access is estab-
lished to the product, you will see a screen
similar to the one below.
When the Remote Control is on, you can
only manage, turn-off and status follow-up
operations through your washing machine.
And all functions except child lock can be
managed through the application.
You can monitor from the function indic-
ator on the button whether the Remote
Control function is on or off.
If the Remote Control function is off, all op-
erations are performed over the machine,
only the performance of status follow-up is
allowed over the application.
If the Remote Start function cannot be
turned on, you will hear a warning sound
when you press the button. This may be ex-
perienced if the appliance is turned on and
there is no appliance paired with Bluetooth.
As an example for these cases; the
Bluetooth setting is turned off or the
product cover is open.
When you activate this function in the
washing machine, this function remains
active except under certain circumstances
and allows you to control your washing ma-
chine remotely via Bluetooth.
Under certain conditions, it is automatically
disabled for safety reasons:
• When your machine's power is cut.
• When the program button is turned and a
different program is selected or the appli-
ance is turned off.
6.15.4 Troubleshooting
If you are having trouble on controlling or
connecting, apply the following steps. Ob-
serve whether the problem persists or not
after the action you have performed.
1. Check whether your smart device is con-
nected to the relevant home network.
2. Restart the product application.
