EN / 50
Metal sounds are heard while the
product is warming and cooling.
• Metal parts may expand and make sounds
when heated. >>> This is not an error.
The product does not work.
• Fuse may be faulty or blown. >>> Check
the fuses in the fuse box. Change them if
necessary or reactivate them.
• The appliance may not be plugged to the
(grounded) outlet. >>> Check if the appli-
ance is plugged in to the outlet.
• (If there is timer on your appliance) Keys
on the control panel do not work. >>> If
your product has a key lock, the key lock
may be enabled, disable the key lock.
Oven light is not on.
• Oven lamp may be faulty. >>> Replace
oven's lamp.
• No electricity. >>> Ensure the mains is op-
erational and check the fuses in the fuse
box. Change the fuses if necessary or re-
activate them.
Oven is not heating.
• The oven may not be set to a specific
cooking function and/or temperature. >>>
Set the oven to a specific cooking function
and/or temperature.
• For the models with timer, the time is not
set. >>> Set the time.
• No electricity. >>> Ensure the mains is op-
erational and check the fuses in the fuse
box. Change the fuses if necessary or re-
activate them.
• The oven door may be open. >>> Make
sure the oven door is closed. If the oven
door remains open for more than 5
minutes, the time setting made for cooking
is cancelled and heaters do not work.
(For models with timer) The timer dis-
play flashes or the timer symbol is left
open.
• There has been a power outage before.
>>> Set the time / Turn off the product
function knobs and again switch it to the
desired position.
The microwave does not work.
• It was not properly plugged in. >>> Plug
the cord.
• There might be an object between the
door and the oven. >>> Remove the ob-
ject and completely shut the lid.
The microwave makes strange noises
whist operating.
• There is some electrical arch inside,
caused by a metal object in the oven. >>>
Remove the metal object from the oven.
• The hardware of the oven is touching the
wall. >>> Cut its touch with the oven wall.
• There is a loose fork, knife or a cooking
tool in the oven. >>> Remove the fork,
knife or a cooking tool from the oven.
The meal does not heat up, or it is too
slow.
• The correct operation time and/or power
level is not chosen. >>> Choose the right
cooking power and time for the type of
meal you are heating.
• The quantity of food may be too much or it
may be too cold. >>> Set additional cook-
ing time. Constantly check for the meal
not to burn.
• There is a loose fork, knife or a cooking
tool in the oven. >>> Remove the fork,
knife or a cooking tool from the oven.
The meal is too hot, dry or burnt.
• The correct operation time and/or power
level is not chosen. >>> Check if you have
chosen the right cooking power and time
for the type of meal you are heating. Call
the authorized service if your appliance is
damaged.
Some sounds come from the oven once
the cooking time is over.
• Cooling fan might be working. >>> This is
not an error. The cooling fan continues op-
erating after the oven shuts down. When
the temperature is low enough, the fan
shuts down automatically.
Summary of Contents for BBCW12400X
