Beko BDCB8020W, User Manual

8 

Dryer / User manual

• Install the product where periodic maintenance and cleaning can be 

done with ease.

• Place the product with its back surface to the wall (for heater models).
• After placing the product, ensure that the back wall does not come in 

contact with any extrusion (a water tap, electrical outlet etc.).

• Place the product with at least 1 cm space between the product and 

the furniture edges.

• Follow the flue connection rules specified in the guide (for models with 

flue).

• The exhaust air shall not be directed to flue which is used to exhaust the 

smoke of devices that consume gas or other fuels (for models with flue).

• The ventilation hose shall not be connected to a heating stove or a 

chimney flue (for models with flue).

• Plug the product to a grounded outlet protected with an appropriate 

fuse in align with the specified type and current rates. Have an expert 

electrician set grounding equipment. Do not use the product without a 

grounding conforming with regional/national regulations.

• Plug the product in a grounded socket that conforms with the voltage, 

current and frequency values specified in the type label.

• Do not plug the product to loose, broken, dirty, greasy sockets or 

sockets that has come out their seats or sockets with a risk of water 

contact.

• The new hose sets supplied with the product shall be used. Do not re-

use the old hose sets. Do not make attachments to the hoses.

• Place the power cord and hoses not cause a risk of tripping over.
• To use the product on top of a washing machine, a fixing aperture shall 

be used between two products. Fixing aperture shall be mounted by the 

authorised service.

• When the product is placed on the washing machine, their combined 

weight when full could be around 180 kg. Place the products on a 

sturdy floor that can carry adequate amount of load.

• Washing machine cannot be placed on top of the drying machine.