27/EN
Bottle and Dish Holder on the
Lower Basket
(depends on model)
Bottle and dish holder (A) on the lower
basket is designed to facilitate washing
dirty kitchenware with narrow openings and
with greater height. After bringing the
foldable wires to horizontal position, you
may place your bottles on the bottle
holders. Secure your bottles by clamping
them with the bottle holder clip as shown in
the figure below.
A
And when you bring the foldable wire to
vertical position, you may place your dishes
without removing the holders.
Bringing the wires to horizontal
position by holding them from their
ends may cause them to be bent.
Thus, it is advisable to bring the wires
to horizontal or vertical position by
holding them from their bottom.
Tray Washing Support
(depends on model)
You may use the tray washing supports
if you want to wash a tray on your lower
basket.
Refer to the Additional Functions section to
select the proper program and function.
You may fold this part when it is not used to
facilitate the placement of your dishes.
1
2
You may also remove the part when
required as shown in figures 1 and 2.
The tray washing supports shall be
removed as shown in figures 1 and
2 for performance inspection tests
that shall be performed as per the
standards.