background image

42/EN

There is a different odour in the machine

  A new machine has a peculiar odour. It will fade out after a couple of washes.

•  Filters are clogged. >>> Check if the filter system is clean. Clean the filter system 

regularly as illustrated in section “Cleaning and Care”.

•  Dirty dishes are kept in dishwasher for 2-3 days. >>> If you are not going to start 

the machine right after you have put the dishes into it, remove the remnants on the 

dishes and run the Prewash programme without detergent every 2 days. In such 

cases, do not close the door of the machine completely in order to avoid odour build 

up in machine. You can also use commercially available odour removers or machine 

cleaners.

Rust, discoloration or surface deterioration occurs on dishes

•  Salt leakage exists. >>> Salt may cause deterioration and oxidation on metal surfaces. 

Pay attention not to spill salt around the salt filling hole while adding salt. Make sure 

that the salt reservoir lid is tightly closed after finishing the filling process. Run the 

prewash programme to remove the salt that spilled inside the machine. Since the salt 

granules that will remain under the lid will dissolve during prewash, causing the lid 

loosen, check the lid once again at the end of the programme.

•  Salty food remnants have remained on dishes for a long time.  >>> If cutlery soiled 

with such foods will be kept waiting in machine, dirt must be removed by prewash or 

dishes must be washed without being kept waiting.

•  Electric installation is not grounded. >>>Check if your machine is connected to the 

actual grounding line. Otherwise, the static electric created in the product causes arcs 

on the surfaces of metal items creating pores, removing the protective cover on the 

surface and causing discoloration.

•  Intensive cleansers such as bleaches are used. >>> Protective cover on metal 

surfaces gets damaged and looses its efficiency in time when it gets in contact with 

cleansers such as bleach. Do not wash your dishes with bleach.

•  Metal items particularly knives are used for purposes other then their intended uses.  

>>> Protective cover on the edges of knives may get damaged when they are used for 

purposes such as opening cans. Do not use metal kitchen utensils out of their intended 

uses.

•  Cutlery are made of low quality stainless steel. >>> Corrosion on such items is 

inevitable; they should not be washed in dishwashers.

•  Kitchen utensils that are already corroded are washed in dishwasher. >>> Rust on a 

corroded item can migrate to other stainless steel surfaces and cause corrosion on 

those surfaces as well. Such items should not be washed in dishwashers.

Detergent remains in detergent dispenser.

•  Detergent dispenser was damp when adding detergent. >>> Make sure that the 

detergent dispenser is dried well prior to filling it with detergent.

•  Detergent is added long before the washing process. >>> Pay attention to add 

detergent shortly before start-up of the washing.

Summary of Contents for BDFS16020W



















































Reviews: