16 / 21 EN
Split floor-standing air conditioner
/ User Manual
1. During the operation of the air conditioner, press the Timer button and the air conditioner will enter
the timed switch-off mode.
2. Continually press the Timer button to set the needed time for switching off the machine. The timer
can make the setting in the range from 1-24 hours. Every the button is pressed, indication change is
the following sequence: 1 2 …… 24
cancel (no indication) 1.
3. After the setting of the timed switch-off, the digits shown on the display screen will go down by
1 for every elapsed hour. The displayed digits indicate the remaining time prior to the timed switch-
off.
Set turning on time
Set the time for the unit to turn on and when it is time, the air conditioner will automatically start
operating.
1. When the air conditioner is in the standby mode, press the Timer button and the air conditioner will
enter the timed switch-on mode.
2. Continually press the Timer button to set the needed time for switching on the machine. The timer
can make the setting in the range from 1-24 hours. Every the button is pressed, indication change is
the following sequence: 1 2 …… 24
cancel (no indication) 1.
3. After the setting of the timed switch-on, the digits shown on the display screen will go down by 1 for
every elapsed hour. The displayed digits indicate the remaining time prior to the timed switch-on.
Releasing procedure
When the indication on display screen is 24 hour, press the Timer button again to delete the timed
mode.
4.3 Sleep operation
Use this mode to reduce operation sound when sleeping, etc.
Press the Sleep button, the air flow sound from the indoor unit is decreased.
Press the Sleep button again can release the mode.
C
Note:
•
Use the sleep mode when you are going to bed. If this mode is used in the day, the
capacity is reduced since the ambient temperature is too high. (Cool mode).
•
During the operation of cooling, the room temperature will be raised gradually by 2°C
higher than the setting after the machine begins to operate in the sleeping mode.
•
During the operation of heating mode, the room temperature will be dropped
gradually 5°C lower than the setting after the machine begins to operate in the
sleeping mode.
4
Use of remote controller
Summary of Contents for BFYH 500
Page 1: ...BFYH 500 BFYH 501 Split floor standing air conditioner User Manual EN RU ...
Page 2: ......
Page 43: ......
Page 45: ...www beko com ...