Beko BK 2600, User Manual

Remote control

ƽ

X-FAN button

X-FAN

ƽ

+ button

+

ƽ

 Presetting temperature can be decreased.

Press this button, the temperature can be

- button

-

set up, continuously press this button 

and hold for two seconds, the relative 

contents can quickly change, until unhold

this button and send the order that the

(

o

F)

signal will be displayed all the time.

The temperature adjustment is unav-

ailable under the Auto mode, but the order
can be sent by if pressing this button.

Names and functions of wireless remote control

Operation of wireless remote control

PressingX-FAN button in COOL or DRY
mode,the icon      is displayed and the

even though you have turned off the unit.

After energization, X-FAN OFF is defaulted.

X-FAN is not available in  AUTO,FAN or
HEAT mode.

Note:X-FAN (or BLOW:same function, 
different name)

indoor fan will continue operation for
10 minute in order to dry the indoor unit

In Cool or Heat mode, press this button
can turn on or turn off the Turbo function.

After turned on the Turbo function, its
signal will be displayed. When switching
the mode or changing fan speed, this

function will be canceled automatically.

For presetting temperature increasing. 
Press this button,can set up the temperature,

when unit is on . Continuously

press and 

hold this button for more than 2 seconds, 

the corresponding contents will be 

changed rapidly, until unpress the button

laying all along. In Auto mode, the temp-

erature can not be set up, but operate this
button can send the signal. Centigrade

setting range :16-30; Fahrenheit scale

setting range 61-86.

then send the information,            is disp-

with multifunction; For some  function, which the model dosen't have, if press the

corresponding button on the remote controller that the unit will keep the original 

running status.

Notice: This is a general use remote controller, it could be used  for  the air conditioners

7

ƽ

Press this button, could select displaying
the indoor setting temperature or indoor 
ambient temperature.When the indoor unit
firstly power on it will display the setting 
temperature, if the temperature's displaying

status is changed from other status to"      ",
displays the ambient temperature, 5s later
or within 5s, it receives other remote control
signal that will return to display the setting
temperature. if the users haven't set up the
temperature displaying status,that will 
display the setting temperature.

TEMP button

TEMP

(This function is applicable to partial of models)

ƽ

TURBO button

TURBO