Beko BK 7120 T, Manual

EN

13

4

  Using your refrigerator

Thermostat setting button

The interior temperature of your 
refrigerator changes for the following 
reasons;
•  Seasonal temperatures,
•  Frequent opening of the door and 

leaving the door open for long 
periods,

•  Food put into the refrigerator 

without cooling down to the room 
temperature,

•  The location of the refrigerator in the 

room (e.g. exposing to sunlight).

•  You may adjust the varying interior 

temperature due to such reasons 
by using the thermostat. Numbers 
around the thermostat button 
indicates the cooling degrees.

•  If the ambient temperature is higher 

than 32°C, turn the thermostat button 
to maximum position. 

•  If the ambient temperature is lower 

than 25°C, turn the thermostat button 
to minimum position.

Defrost

Fridge compartment performs full-
automatic defrosting. Water drops and 
a frosting up to 7-8 mm can occur 
on the inner rear wall of the fridge 
compartment while your refrigerator 
cools down. Such formation is normal 
as a result of the cooling system. 
The frost formation is defrosted by 
performing automatic defrosting 
with certain intervals thanks to the 
automatic defrosting system of the rear 
wall. User is not required to scrape the 
frost or remove the water drops.
Water resulting from the defrosting 
passes from the water collection 
groove and  flows into the evaporator 
through the drain pipe and evaporates 
here by itself. 
Check regularly to see if the drain pipe 
is clogged or not and clear it with the 
stick in the hole when necessary. 
Deep freezer compartment does not 
perform automatic defrosting in order 
to prevent decaying of the frozen food.