Beko BKK 2141, User Manual

9

Steam Ironing

1.

 Fill the iron as described in the 

section of “How To Fill Water”.

2.

 Connect the iron to a suitable 

mains supply outlet

3.

 “Beep” sound would be heard 

and the LCD would display all 

logos for a Second then turn off.

6.

 Press “Temperature up / ON 

OFF” button once, the LCD would 

display the fabric type (ACRYL), 

temperature indicators ( ) and the 

steam indicator ( ).

4.

 To select the higher tem-

perature setting (Cotton, Jeans & 

Linen), See “How To Set Tempera-

ture”.

5.

 Press the Steam Control Button 

once the 

 icon will display on 

the LCD and steam will come out.

6.

 The iron is now ready to use.

7.

 Press and hold the “Tempera-

ture up / ON OFF button” 3 sec 

the LCD display will off with a 

beep sound.

8.

 Disconnect the iron from mains 

supply outlet.

9.

 When the iron gets cool com-

pletely, store it vertically in a safe 

place.

Note:

- The steam function only working 

at the higher temperature setting 

(Cotton, Jeans & Linen).

- Double continuous beep sound 

would be heard and LCD would 

display the steam off indicator ( ), 

if press the steam button  for the 

lower and medium temperature 

settings (Acryl, Nylon, Silk, Poly, 

Blend & Wool).

Burst Of Steam

This function provides extra 

amount of steam to remove stub-

born wrinkles.

1.

 Fill the iron as described in the 

section of “How To Fill Water”.

2.

 Connect the iron to a suitable 

mains supply outlet

3.

 “Beep” sound would be heard 

and the LCD would display all logo 

for a Second then turn off.

7.

 Press “Temperature up / ON 

OFF” button once, the LCD would 

display the fabric type (ACRYL), 

temperature indicators ( ) and the 

steam indicator ( ).

4.

 To select the temperature set-

ting according to the recommen-

dation of the garment label, See 

“How To Set Temperature”.

5.

 The iron is now ready to use.

6.

 Press the Burst Of Steam But-

ton.

7.

 Steam will shoot from the holes 

of the soleplate into the fabric 

being ironed and removing the 

wrinkles.

8

. For stubborn wrinkles, wait a 

few seconds before pressing the 

Burst of Steam Button again. Most 

wrinkles can be removed within 

three presses.