12 / EN
Juice Extractor / User's Manual
3.1 Intended use
The appliance is intended for home
use only, it is not suitable for pro-
fessional use.
The appliance is designed for
squeezing only small amounts of
fruits.
3
Operation
3.2 First operation
Remove the parts of the appliance
before the first use (see 4.2) and
clean them (see 5.1).
4
Installation
4.1 Installation
1. Remove the power cord from the
cable winding tool located at the
bottom of the appliance (9).
2. Place the pulp container (12) on
the motor body (5) in such a way
that the fruit juice tap matches
with its position on the motor
body.
3. Place the blade filter (8) in the
middle of the pulp container (12)
in such a way that it matches with
its teeth on the motor body (5).
–
When it is in place, a "clicking"
sound is heard.
4. Place the latch gaps of the trans-
parent filter cover (3) on the pulp
container (12) by matching them
with the side of the latches.
5. Lift the locking latches (4) up-
wards and place them to the
gaps on the sides of the trans-
parent filter cover (3).
6. Close the lower parts of the lock-
ing latches (4) by gently pressing
them.
–
A locking sound is heard.
A
WARNING:
Make
sure that all the parts
are fully in place.
Otherwise, the appli-
ance will not work.
A
WARNING:
Open
the locking latch (4)
when the appliance
is in "0" off position
and the filter (8)
stops completely.
