15 / 30 EN
Steam Iron / User Manual
5
Troubleshooting
Although the appliance is plugged in, soleplate (4) does not heat up.
•
The appliance may be improperly connected.
>>>
Check the plug and power
cable (1) of the appliance.
•
Temperature adjustment dial (3) may be at the Min. position.
>>> Turn the
temperature adjustment dial (3) in the clockwise direction up to the steam sign.
The appliance does not generate steam.
•
The water reservoir may not have enough water.
>>> Fill the water reservoir
with water up to Max level (see. 3.3).
•
Steam setting dial (7) may be at without-steam position.
>>> Switch the
steam adjustment knob to the steam position (see. 3.6).
Shock Steam – Vertical Steam does not function.
•
These functions may have been used too frequently in a very short period of
time.
>>> Keep ironing at a horizontal position and wait for a while before
using the shock steam function again. >>> Soleplate may not be hot enough.
Turn the temperature adjustment dial (3) in the clockwise direction up to the
steam sign. Seat the appliance in a vertical position and wait for the soleplate
to heat up.
Water drops fall down onto the fabric during ironing.
•
You may not have fully closed the water refill lid (6).
>>> Close the water refill
lid completely.
During ironing, sediments and residues fall down from the soleplate (4).
•
If the water you use for your appliance is too hard, such sediments may form.
>>> Use the self-clean function for once or a few times (see. 4.2). In your next
ironing session, add soft water into your appliance.
The appliance drops water after it cools down or stored.
•
After operating the appliance, steam setting knob (7) may be left at ON position.
>>> Set the steam setting dial to OFF position and empty the water reservoir.
Stains at the soleplate.
•
Wet garments might have been ironed and the soleplate (4) has had lime
stains.
>>> After the appliance cools enough, wipe the soleplate (4) with a
microfiber knitted or cotton cloth soaked in vinegar.
