10 / 42 EN
Jug Blender / User Manual
4
Information
4.1 Tips for blending
•
To add ice cubes to mixtures while the blender
is operating, add one cube at a time through cap
A
. Wait a few seconds before adding the next
ice cube so that the blender can properly blend
the ice.
•
To add food while the blender is operating,
remove the cap
A
and drop the ingredients
through the opening. Be sure to cut the food into
about 2-5 cm pieces to fit through the opening.
Replace the cap
A
when you have finished ad-
ding ingredients.
•
When blending solid foods, such as raw vegetab-
les, cooked or uncooked meats and fruits always
cut them into no larger than 2-5 cm pieces
before placing them into the glass jug. Blend no
more than 2 cups of these foods at a time. This
will speed the blending process and reduce wear
on the blending blades.
•
Always place liquid ingredients in the glass jug
first, unless a recipe specifically states otherwise.
•
To blend beverages, place all ingredients in the
glass jug at the same time.
•
Avoid overblending. Usually, you will need to
blend for a few seconds.
•
Overblending may cause food to become mushy.
4.2 Cleaning and care
Caution
•
Never use petrol, solvents, abrasive cleaners,
or metal objects and hard brushes to clean the
appliance.
•
The blades of cutter unit are very sharp! Handle
the blades with utmost care in order to avoid
injuries.
•
Never clean the appliance with your bare hands.
•
Clean the jug blender after each use. Do not let
any food remnants harden on and inside the jug
blender. This will make it more difficult to clean
it later.
•
Do not use boiling water. The blade assembly
bearings have been designed with a lifetime
lubricant; exposure to boiling water may damage
these bearings and shorten the life of the blen-
der.
1. Turn the appliance off and disconnect it from the
wall socket.
2. Allow the appliance to cool down.
3. Remove the glass jug
D
from the motor housing
H
. Rinse with water to remove any large food
particles that may have accumulated in the glass
jug.
4. Replace the glass jug
D
on motor housing
H
.
5. Place 1 to 1 ½ cups warm water with some
drops of mild cleanser into the glass jug
D
and
switch to speed “3” for a few seconds. Remove
the glass jug from motor housing and rinse with
water. Repeat as necessary.
Note
•
Do not immerse the motorized base or blade unit
in liquid, or place them in the dishwasher. Only
the lid and the glass jug may be immersed and
placed in the dishwasher.
6. Use a damp soft cloth and some mild cleanser to
clean the exterior of the appliance.
7. Wipe the blender base, cutter unit
F
and lid with
a lint free cloth before the next usage.
4.3 Storage
•
If you do not plan to use the appliance for a long
period of time, please store it carefully.
•
Make sure the appliance is unplugged and
completely dry.
•
Store the appliance in a cool, dry place.
•
Make sure the appliance is kept out of the reach
of children.
