14 / 32 EN
Hand Blender / User Manual
3.4 Operation
1. Put the food that you would like
to puree or mix in the measuring
beaker “9” or in any other similar
bowl.
2. Connect the base unit “5” to the
blender “7” by putting the blen-
der onto the base unit. Turn the
base unit to the left.
– Make sure the blender is
properly attached to the base
unit
3. Insert the plug “2” into the wall
socket.
4. Immerse the blender “7” in the
measuring beaker “9”, where the
ingredients to be blended are.
C
To prevent the ingre-
dients from splash-
ing, do not press the
On/Off button level
I “3”and On/Off butf-
ton level II “4” until
the blender has been
immersed in the in-
gredients
.
5. Press and hold down the On/Off
button level I “3”.
– The appliance starts operating.
3
Operating the product
C
Always use the ap-
pliance on level I. If
necessary, press and
hold down the On/
Off button level II “4”.
Once you release the
On/Off button level
I “3” , the appliance
switches off auto-
matically
.
C
Do not use the appli-
ance for longer than
one minute at a time
.
6. Move the appliance slowly up
and down and in circles to blend
the ingredients.
7. Release the On/Off button level
I “3” or On/Off button level II “4”
when you finish the process and
disconnect the power plug from
the socket.
8. Remove the mixture from the
measuring beaker “9”.
9. Disassemble the blender “7”
from the base unit “5” by turning
the base unit to the right and
pulling it off.
